LXE mx7 Verweisanleitung
118
Settings | Control Panel Options
MX7 Reference Guide
E-EQ-MX7RG-H
MX7II Options
Access:
| Settings | Control Panel | MX7II Options
Set options such as IP V6, time sync, touchscreen enable and CapsLock.
It may be necessary to warmboot the MX7 after making desired changes. A pop up window
indicates if a warmboot is required.
indicates if a warmboot is required.
Factory Default Settings
Communication
IP Version 6 Addressing
IP Version 6 Addressing
Disabled
Allow Remote Desktop Autologon
Disabled
Autolaunch TimeSync
Disabled
Misc
CapsLock Disabled
NumLock Enabled
Touch screen disable
CapsLock Disabled
NumLock Enabled
Touch screen disable
Disabled
Figure 3-27 MX7 Options Properties
Enable (check) or disable (uncheck) desired options. Tap OK to save the settings or tap the “X”
button to ignore changes. Tap the “?” box for Help.
button to ignore changes. Tap the “?” box for Help.
The changes take effect immediately or where noted after a warmboot.
Communication
Options on this tab configure communication options. Options not available on the MX7 are
dimmed.
dimmed.
IP Version 6
Addressing
Addressing
By default, IPv6 is disabled. Enable this checkbox (checked) to enable IPv6.
Allow Remote
Desktop
Autologon
Desktop
Autologon
By default, remote desktop autologon is disabled. Enable this checkbox to
enable this function.
enable this function.
Note: The The .RDP file must be saved in the \System
folder. When prompted, use the Save As button to save the .RDP file is the
\System directry. If the .RDP file is saved in the default root folder location,
\System directry. If the .RDP file is saved in the default root folder location,