LXE mx7 Verweisanleitung
126
Settings | Control Panel Options
MX7 Reference Guide
E-EQ-MX7RG-H
Remove Programs
Access:
| Settings | Control Panel | Remove Programs
Note:
Programs listed in this location are deleted upon warm and cold boot processes.
Select a program and tap Remove. Follow the prompts on the screen to uninstall user-installed
only programs. The change takes effect immediately.
only programs. The change takes effect immediately.
Files stored in the “My Documents” folder are not removed using this option.
Note:
Do not remove LXE-installed programs using this option.
Scanner
Access:
| Settings | Control Panel | Scanner
Set scanner keyboard wedge, scanner icon appearance, active scanner port, and scan key settings.
Assign baud rate, parity, stop bits and data bits for available COM ports. Scanner parameters
apply to the MX7 integrated scanner/imager only. Barcode manipulation parameters apply to
barcodes scanned by the integrated scanner/imager engine only.
Assign baud rate, parity, stop bits and data bits for available COM ports. Scanner parameters
apply to the MX7 integrated scanner/imager only. Barcode manipulation parameters apply to
barcodes scanned by the integrated scanner/imager engine only.
Scanner configuration can be changed using the Scanner Control Panel or via the LXE API
functions. While the changed configuration is being read, the Scanner LED is solid amber. The
scanner is not operational during the configuration update.
functions. While the changed configuration is being read, the Scanner LED is solid amber. The
scanner is not operational during the configuration update.
Current Scanner wedge software description and explanation is contained in Chapter 4 – Scanner.
Previous wedge versions are contained in Appendix C – Reference Material, section titled LXE
Scanner Wedge.
Scanner Wedge.