LXE mx7 Verweisanleitung
Wavelink Avalanche Enabler Configuration
149
E-EQ-MX7RG-H
MX7 Reference Guide
Stop the Enabler Service
To stop the Enabler from monitoring for updates from the Avalanche MC Console:
1. Open the Enabler Settings Panels by tapping the Avalanche icon on the desktop.
2. Select File | Settings. Enter the password.
3. Select the Startup/Shutdown tab.
4. Select the “Do not monitor or launch Enabler” parameter to prevent automatic monitoring
2. Select File | Settings. Enter the password.
3. Select the Startup/Shutdown tab.
4. Select the “Do not monitor or launch Enabler” parameter to prevent automatic monitoring
upon startup.
5. Select Stop Monitoring for an immediate shutdown of all enabler update functionality
upon exiting the user interface.
6. Click the OK button to save the changes.
7. Reboot the device if necessary.
7. Reboot the device if necessary.
Update Monitoring Overview
There are three methods by which the Enabler on an LXE device can communicate with the
Mobile Device Server running on the host machine.
Mobile Device Server running on the host machine.
•
Wired via a serial cable between the Mobile Device Server and the LXE device.
•
Wired via a USB connection, using ActiveSync, between the Mobile Device Server and
the mobile device.
the mobile device.
•
Wirelessly via the 2.4GHz network card and an access point
Following a mobile device reboot, the Enabler searches for a Mobile Device Server, first by
polling all available serial ports and then over the wireless network. The designation of the mobile
device to the Avalanche Mobility Center Manager is LXE_MX7.
polling all available serial ports and then over the wireless network. The designation of the mobile
device to the Avalanche Mobility Center Manager is LXE_MX7.
The Enabler running on LXE Windows CE devices will attempt to access COM1, COM2, and
COM3. “Agent not found” will be reported if the Mobile Device Server is not located or a serial
port is not present or available (COM port settings can be verified using the LXE scanner applet
in the Control Panel).
COM3. “Agent not found” will be reported if the Mobile Device Server is not located or a serial
port is not present or available (COM port settings can be verified using the LXE scanner applet
in the Control Panel).
The wireless connection is made using the default network interface on the mobile device
therefore the device must be actively communicating with the network for this method to succeed.
If a Mobile Device Server is found, the Enabler will automatically attempt to apply all wireless
and network settings from the active profile. The Enabler will also automatically download and
process all available packages.
therefore the device must be actively communicating with the network for this method to succeed.
If a Mobile Device Server is found, the Enabler will automatically attempt to apply all wireless
and network settings from the active profile. The Enabler will also automatically download and
process all available packages.