LXE mx7 Verweisanleitung
162
Wavelink Avalanche Enabler Configuration
MX7 Reference Guide
E-EQ-MX7RG-H
Use Manual Settings
When enabled, the Enabler will ignore any network or wireless
settings coming from the Avalanche Management Console and use
only the network settings on the mobile device.
settings coming from the Avalanche Management Console and use
only the network settings on the mobile device.
Properties Icon
Selecting the Properties icon displays the Manual Settings Properties
dialog applet. From here, the user can configure Network, DNS and
Wireless parameters using the displays shown below:
dialog applet. From here, the user can configure Network, DNS and
Wireless parameters using the displays shown below:
Note:
A reboot may be required after enabling or disabling these options.
Network DNS Wireless
For device-specific descriptions of these Enabler parameters, refer to Chapter 5 “Wireless Network Configuration”.
LXE does not recommend enabling “Manage Wireless Settings” for Client devices.
Figure 3-57 Manual Settings Properties Panels
When you download a profile that is configured to manage network and wireless settings, the
Enabler will not apply the manage network and wireless settings to the adapter unless the global
Manage wireless settings and Manage network settings options are enabled on the Adapters
panel (see Figure titled Avalanche Enabler Adapters Options – Network). Until these options are
enabled, the network and wireless settings are controlled by the third-party software associated
with these settings.
Enabler will not apply the manage network and wireless settings to the adapter unless the global
Manage wireless settings and Manage network settings options are enabled on the Adapters
panel (see Figure titled Avalanche Enabler Adapters Options – Network). Until these options are
enabled, the network and wireless settings are controlled by the third-party software associated
with these settings.
MX7 and Controlling Wireless Settings
Odyssey Client on the MX7
If the Odyssey Client on the LXE MX7 mobile device is the default client control application,
follow these instructions. The Odyssey Client application cannot be automatically disabled by the
Enabler. After the Enabler has made contact with the Mobile Device Server and if the Enabler is
to control the wireless settings on the MX7 the administrator must:
follow these instructions. The Odyssey Client application cannot be automatically disabled by the
Enabler. After the Enabler has made contact with the Mobile Device Server and if the Enabler is
to control the wireless settings on the MX7 the administrator must:
1. Disable the Odyssey Client. Start the Funk Odyssey Client Configuration user interface by
tapping the Odyssey Client icon on the MX7 desktop.
2. Tap Settings | Disable Odyssey. Select Exit. Perform a warm reset.
3. Download the wireless settings that are to be applied to the MX7.
3. Download the wireless settings that are to be applied to the MX7.