LXE mx7 Verweisanleitung
170
Determine Your Scanner Software Version
MX7 Reference Guide
E-EQ-MX7RG-H
Determine Your Scanner Software Version
Integrated Scanner Programming Guide and the Reset All barcode. After scanning
the Reset All (to factory defaults) barcode for the specific scan engine, the next step is
Start | Control Panel | Scanner. Tap the OK button and close the scanner applet.
This action will synchronize all scanner formats.
the Reset All (to factory defaults) barcode for the specific scan engine, the next step is
Start | Control Panel | Scanner. Tap the OK button and close the scanner applet.
This action will synchronize all scanner formats.
Note:
Scanner control panel options are based on the installed software version levels, driver
and OS versions in MX7 devices. Your Scanner options may or may not be as described
in this section. Contact your LXE representative to obtain the most current software and
drivers for your mobile device. To identify the software version, tap the “About” icon in
the Control Panel.
and OS versions in MX7 devices. Your Scanner options may or may not be as described
in this section. Contact your LXE representative to obtain the most current software and
drivers for your mobile device. To identify the software version, tap the “About” icon in
the Control Panel.
If the Barcode Tab looks like this . . . .
Go to . . . .
Appendix C – Reference Material,
section titled LXE Scanner Wedge.
It looks different
This chapter.
Figure 4-1 Scanner Control Panels