LXE mx7 Verweisanleitung
196
Summit Client Configuration
MX7 Reference Guide
E-EQ-MX7RG-H
Main Tab
Note:
Terminology used on your screen displays may be different than those shown in the
figures in this chapter.
figures in this chapter.
Factory Default Settings
Main
Admin Login
SUMMIT
Radio Enabled
Active Config/Profile
Active Config/Profile
Default
Regulatory Domain
FCC or ETSI
or
Figure 5-2 Summit Client Utility – Main tab
The Main tab displays information about the wireless client device including:
•
SCU (Summit Client Utility) version.
•
Driver version.
•
Radio Type (BG is an 802.11 b/g radio, ABG is an 802.11a/b/g radio).
•
Regulatory Domain.
•
Copyright Information by be accessed by tapping the About SCU button.
•
Active Config / Active Profile profile name.
•
Status of the network device (Down, Associated, Authenticated, etc).
The Active Config or Active Profile can be switched without logging in to Admin mode. A
password is required before making changes to Summit client profile parameters. A password is
not required to switch from one profile to another. LXE recommends performing a
Suspend/Resume function after changing profiles.
password is required before making changes to Summit client profile parameters. A password is
not required to switch from one profile to another. LXE recommends performing a
Suspend/Resume function after changing profiles.
When the profile named “ThirdPartyConfig” is chosen as the active profile, the Summit Client
Utility passes control to Windows Zero Config for configuration of all client and security settings
for the network module. See Wireless Zero Config Utility later in this chapter for Wireless Zero
Config instruction.
Utility passes control to Windows Zero Config for configuration of all client and security settings
for the network module. See Wireless Zero Config Utility later in this chapter for Wireless Zero
Config instruction.
The Disable Radio button can be used to disable the network card. Once disabled, the button label
changes to Enable Radio. By default the radio is enabled.
changes to Enable Radio. By default the radio is enabled.
The Admin Login button provides access to editing wireless parameters. Config / Profile and
Global / Global Settings may only be edited after entering the Admin Login password. The
Global / Global Settings may only be edited after entering the Admin Login password. The