LXE mx7 Verweisanleitung
Summit Client Configuration
203
E-EQ-MX7RG-H
MX7 Reference Guide
Status Tab
This screen displays information on the current profile and client connection. Information cannot
be edited or changed on the Status panel.
be edited or changed on the Status panel.
or
Figure 5-6 Summit Client Utility – Status tab
The panel displays:
•
Config / Profile being used.
•
The client name, IP address and MAC address.
•
The status of the network connection (down, associated, authenticated, etc.).
•
The name, IP address and MAC address of the Access Point maintaining the connection to
the network.
the network.
•
Channel currently being used for wireless traffic.
•
Beacon period – the time between AP beacons in kilomicroseconds (1 kilomicrosecond –
1,024 microseconds).
1,024 microseconds).
•
DTIM interval – A multiple of the beacon period that specifies how often the beacon
contains a delivery traffic indication message (DTIM). The DTIM tells power saving
devices a packet is waiting for them. For example, if DTIM = 3, then every third beacon
contains a DTIM.
contains a delivery traffic indication message (DTIM). The DTIM tells power saving
devices a packet is waiting for them. For example, if DTIM = 3, then every third beacon
contains a DTIM.
•
Current transmit power in mW.
•
Rate in Mbps.
•
Signal strength (RSSI) and signal quality (changes with network activity). Signal quality is
a measure of the clarity of the signal and displayed as a percentage.
a measure of the clarity of the signal and displayed as a percentage.
Note:
After completing radio configuration, it is good practice to review this screen to verify
the radio has associated (no encryption, WEP) or authenticated (LEAP, any WPA) as
indicated above.
the radio has associated (no encryption, WEP) or authenticated (LEAP, any WPA) as
indicated above.