LXE mx7 Verweisanleitung

Summit Client Configuration 

213 

E-EQ-MX7RG-H 

 

MX7 Reference Guide 

If the user taps the Cancel button, the device does not associate. The user is not 
prompted again for credentials until the device is rebooted, the radio is disabled then 
enabled, the Reconnect button on the Diags tag is tapped or the profile is modified and 
the Commit button is tapped. 

EAP-TLS authentication requires a user certificate. The user certificate must be stored in the 
Windows certificate store. 

To generate the user certificate, follow the instructions in Generating a User Certificate for the 
Mobile Device, later in this chapter. 

Import the user certificate into the Windows certificate store by following the instructions in 
Installing a User Certificate on the Mobile Device, later in this chapter. 

A Root CA certificate is also needed for EAP-TLS.  Refer to the section below. 

Root CA certificates are required for PEAP/MSCHAP, PEAP/GTC, and EAP-TLS. Two options 
are offered for storing these certificates. They may be imported into the Windows certificate store 
or copied into the Certs Path directory. 

1.  Follow the instructions later in this chapter for Downloading a Root CA Certificate to a 

PC. 

2.  To import the certificate into the Windows store, follow the instructions for Installing a 

Root CA Certificate on the Mobile Device later in this chapter. 

3.  When completing the Credentials screen for the desired authentication, be sure to check 

the Use MS store checkbox after checking the Validate server checkbox. 

4.  The default is to use all certificates in the store. If this is OK, skip to Step #8. 
5.  Otherwise, to select a specific certificate tap the Browse (…) button.