LXE mx7 Verweisanleitung
Funk Odyssey Client Configuration
229
E-EQ-MX7RG-H
MX7 Reference Guide
Funk Odyssey Client Configuration
Odyssey Client Icon
Start the Funk Odyssey client configuration by tapping the Odyssey Client icon on the desktop or
in the taskbar at the bottom right corner of the screen.
in the taskbar at the bottom right corner of the screen.
To create a Funk Odyssey Client user login, please refer to Chapter 3 “System
Configuration”, section titled “LXE Login Utility.”
Configuration”, section titled “LXE Login Utility.”
For additional information on the Odyssey client see the Funk web site at www funk com.
Note:
LXE recommends using the Funk Odyssey client to configure the client device. Wireless
Zero Config is not recommended for configuring the client device, although it can be
used to reveal the IP address.
Zero Config is not recommended for configuring the client device, although it can be
used to reveal the IP address.
Prerequisites
•
Network SSID or ESSID number of the Access Point
•
WEP or LEAP Authentication Protocol Keys
Odyssey Client Menu
Settings
Factory Default Settings
Settings
Configure
Networks
Blank
Detailed Status
Refresh
Security Settings
Session Resumption
12 hours, Enabled
Automatic Reauthentication
Disabled
Temporary Trust
12 hours, Enabled
EAP-FAST Settings
Acquire credentials from new server
Enabled
Replace credentials upon failure
Enabled
Trusted Servers
Blank
Disable Odyssey
Immediate disabling
Exit
Figure 5-27 Odyssey Client Screens – Settings
Configure
Use this option to edit, add and delete networks.
Detailed Status
Configure advanced security options related to authentication.
Security
Settings
Settings
This option allows the user to enable session resumption, automatic
reauthentication and server temporary trust.
reauthentication and server temporary trust.
EAP-FAST
Settings
Settings
Configure Odyssey to prompt for permission before acquiring new EAP-
FAST credentials.
FAST credentials.