LXE mx7 Verweisanleitung
Components
7
E-EQ-MX7RG-H
MX7 Reference Guide
Scanner / Imager Aperture
CAUTION: Never stare directly into the beam aperture. Read the previous section “Laser
Warnings and Labels” before using the scanner/imager.
Figure 1-3 Beam Aperture
Identify the type of integrated imager or laser scanner installed in the MX7 by looking at the type
of plastic lens covering the Beam aperture.
of plastic lens covering the Beam aperture.
•
The laser barcode scanner has a red lens protecting the laser engine.
•
The No-Scanner option has an opaque lens protecting the MX7 internal components.
•
The EV-15 integrated imager has a clear lens protecting the imager engine.
•
The 5380SF 2D imager has an opaque lens protecting the imager engine.
Continuous Scan Mode
If Continuous Scan Mode has been enabled (default is disabled), the laser is always on and
decoding. Refer to Chapter 4 Scanner.
decoding. Refer to Chapter 4 Scanner.
Caution: Laser beam is emitted continuously. Do not
stare into the laser beam.
AC Adapter
AC Adapter
AC Power Cable
Figure 1-4 AC Adapter
The LXE-approved AC Power Adapter is only intended for use in a 25°C (77°F) maximum
ambient temperature environment.
ambient temperature environment.