LXE mx7 Verweisanleitung

10 

Quick Start 

MX7 Reference Guide 

 

E-EQ-MX7RG-H 

When your mobile device is pre-configured, the network card, keypad and scan aperture 
configurations are assembled by LXE to your specifications. The desktop will display an 
Odyssey Client Utility icon or it will display a Summit Client Utility icon. 

This section’s instructions are based on the assumption that your new system is pre-configured 
and requires only accessory installation (e.g. handstrap) and a power source. LXE recommends 
that installation or removal of accessories be performed on a clean, well-lit surface. When 
necessary, protect the work surface, MX7, and components from electrostatic discharge. 

In general, the sequence of events is: 

1.  Insert a fully charged battery. (Always put a fully charged battery in the MX7 at the 

beginning of the shift or workday.) 

2.  Connect an external power source to the unit (if available). 
3.  If the screen does not automatically display, tap the Power key.  
4.  Calibrate the touchscreen (OS versions released before August 2008 only). 
5.  A white screen will appear during the boot process until all CAB files and applications are 

loaded and installed. Client device setup screens may appear and disappear while files are 
loading.  

6.  After all files are loaded and the Microsoft Windows CE Desktop is displayed, adjust 

audio volume and other parameters if desired. 

7.  Pair Bluetooth devices.  
8.  Setup wireless client parameters.  
9.  Setup terminal emulation parameters.  
10.  Setup mappable keys.  
11.  Save changed settings to the registry. 

 

 

If needed, change the Time and Date from its default value by tapping the 

 | Settings | Control 

Panel | Date/Time icon.