LXE mx7 Verweisanleitung
276
IEEE 802.11g Wireless LAN Configuration Utility
MX7 Reference Guide
E-EQ-MX7RG-H
IEEE 802.11g Wireless LAN Configuration Utility
Access:
WiFi toolbar icon or Start | Programs | Radio Config Utility
WiFi icon in Toolbar
The Radio Config Utility can be used to set the wireless device power management, antenna
diversity and roaming profiles. Currently, LXE recommends using the default values.
diversity and roaming profiles. Currently, LXE recommends using the default values.
The WiFi utility is installed upon each cold reset and warm reset and the icon is minimized to the
toolbar.
toolbar.
Figure 5-103 802.11g WiFi Configuration Utility Menus - Status, CCX, RSSI
The Status screen displays the current status of the network card, current data rate, the current AP
channel that the client is operating on, RSSI threshold and signal strength. These values cannot be
changed by the user.
channel that the client is operating on, RSSI threshold and signal strength. These values cannot be
changed by the user.
The CCX Support options are only populated when the MX7 is connected to a Cisco CCX
compatible network or AP. Radio Measurement Threshold and Max Transmit Power values
cannot be changed by the user.
compatible network or AP. Radio Measurement Threshold and Max Transmit Power values
cannot be changed by the user.
The RSSI Control panel allows the user to set roaming support options. RSSI Threshold default
is -70. RSSI Reading Interval is 1 sec. When the threshold reaches -70, the mobile device begins
searching for a stronger AP signal every second until it locates an AP with a stronger signal.
is -70. RSSI Reading Interval is 1 sec. When the threshold reaches -70, the mobile device begins
searching for a stronger AP signal every second until it locates an AP with a stronger signal.