LXE mx7 Verweisanleitung
76
Installed Software
MX7 Reference Guide
E-EQ-MX7RG-H
Wavelink Avalanche Enabler (Option)
The following features are supported by the Wavelink Avalanche Enabler when used in
conjunction with the Avalanche Manager.
conjunction with the Avalanche Manager.
After configuration, Enabler files are installed upon initial bootup and after a hard reset. Network
parameter configuration is supported for:
parameter configuration is supported for:
•
IP address: DHCP or static IP
•
RF network SSID
•
DNS hosts (primary, secondary, tertiary)
•
Subnet mask
•
Enabler update
Related Manual: “Using Wavelink Avalanche on LXE Windows Computers”.
The MX7 has the Avalanche Enabler installation files loaded, but not installed, on the mobile
device when it is shipped from LXE. The installation files are located in the System folder on CE
devices. The installation application must be run manually the first time Avalanche is used.
device when it is shipped from LXE. The installation files are located in the System folder on CE
devices. The installation application must be run manually the first time Avalanche is used.
After the installation application is manually run, the Enabler begins normal performance. The
Enabler is by default an auto-launch application. This behavior can be modified by accessing the
Avalanche Update Settings panel through the Enabler Interface. The designation of the mobile
device to the Avalanche CE Manager is LXE_MX7.
Enabler is by default an auto-launch application. This behavior can be modified by accessing the
Avalanche Update Settings panel through the Enabler Interface. The designation of the mobile
device to the Avalanche CE Manager is LXE_MX7.
LXE CE devices manufactured before October 2006 must have their drivers and system files
upgraded before they can use the Avalanche Enabler functions. Please contact an LXE
representative for details on upgrading the mobile device baseline.
upgraded before they can use the Avalanche Enabler functions. Please contact an LXE
representative for details on upgrading the mobile device baseline.
See “Wavelink Avalanche Enabler Configuration” at the end of this chapter for instruction.
If the user is NOT using Wavelink Avalanche to manage their mobile device, the Enabler
should not be installed on the mobile device(s).
should not be installed on the mobile device(s).