LXE mx6 Verweisanleitung
MX6 Utilities
91
E-EQ-MX6RG-E
MX6 Reference Guide
Key
Description
Valid Values
DisableActiveSync
Disables the ActiveSync
connection when RASMan is
running.
Default value: 1
connection when RASMan is
running.
Default value: 1
0=Disabled; ActiveSync runs
while RASMan is running.
1=Enabled; the ActiveSync
connection is disabled while
RASMan is running.
while RASMan is running.
1=Enabled; the ActiveSync
connection is disabled while
RASMan is running.
Retry
Specifies the retry count.
Default value: 10
Default value: 10
RetryDelay
Specifies the retry delay.
Default value: 1000
(milliseconds)
Default value: 1000
(milliseconds)
Enter values in milliseconds.
ShowStatus
Enables and disables the
appearance of status dialog
boxes.
Default value: 1
appearance of status dialog
boxes.
Default value: 1
0=Disabled; status dialogs do
not appear.
1=Enabled; status dialogs do
appear.
not appear.
1=Enabled; status dialogs do
appear.
StopOnCriticalError
Forces RASMan to stop running
when a critical error occurs.
Default value: 1
when a critical error occurs.
Default value: 1
0=Disabled; RASMan continues
to run when a critical error
occurs.
1=Enabled; RASMan stops
running when a critical error
occurs.
to run when a critical error
occurs.
1=Enabled; RASMan stops
running when a critical error
occurs.
Reboot
Access:
(Version 7.03 and 7.11) Start | Utils | Reboot
(Version 7.13) Start | Power Tools | Reboot
Tap this icon to initiate a Warm or Cold Boot using the touch screen, as opposed to the keypad
commands. Tap X to close the decision box without rebooting.
commands. Tap X to close the decision box without rebooting.
Warm Boot
(Soft Reset) A warm boot closes all applications, clears the working RAM and
preserves the file system.
preserves the file system.
Or
Press the CTRL and SFT keys at the same time for approximately 10 seconds.
Cold Boot
(Hard Reset) A cold boot forcibly closes all applications, working RAM and
files are cleared and the device’s parameters are reset to factory defaults (or the
last saved registry settings).
files are cleared and the device’s parameters are reset to factory defaults (or the
last saved registry settings).
Or
Press the CTRL and ESC keys at the same time for approximately three
seconds.
seconds.