LXE mx6 Verweisanleitung
156
Settings Options
MX6 Reference Guide
E-EQ-MX6RG-E
Creating and Modifying Profiles
Access:
Start | Settings | Connections tab | 802.11b icon | Config tab
Prerequisites:
•
Network SSID number of the Access Point for the MX6
•
WEP or LEAP Authentication Protocol Keys (LEAP requires Meetinghouse software
described in this chapter.)
described in this chapter.)
Check with your network administrator for the security WEP Key and the Key ID you need to use.
Buttons are located next to “Preferred Profiles:”
New. Create a profile.
Edit. Modify a profile.
Delete. Delete a selected profile.
Move the highlighted profile up to increase the automatic
association priority.
association priority.
Move the highlighted profile down to decrease the automatic
association priority.
association priority.
When Using LEAP
With Meetinghouse Version 2.0.0 (or later) you must enable “Provide Encryption Key
Dynamically” when using LEAP on the Aegis client. Failure to enable this option may prevent the
device from receiving an IP address following a Suspend / Resume function.
Dynamically” when using LEAP on the Aegis client. Failure to enable this option may prevent the
device from receiving an IP address following a Suspend / Resume function.
When Using WEP
If using only WEP, disable the Meetinghouse client and configure the WEP key in the radio
utility:
utility:
Ver 7.11 – Start | Settings | Connection tab | 802.11b | Config tab.
When Using WPA
To configure the radio for WPA functionality the 802.11b configuration tool is not used. All
configuration is done with the Meetinghouse Aegis supplicant.
configuration is done with the Meetinghouse Aegis supplicant.
WPA instruction is located in Chapter 7 “Wireless Network Configuration” only.