LXE mx6 Verweisanleitung
Configuring an MX6 Radio for WPA
259
E-EQ-MX6RG-E
MX6 Reference Guide
4. Write down the valid username and password to use for profiles. Usernames and passwords
are created in the RADIUS server.
5. Write down the Network Profile and Network Name to use for network profiles.
Note: As soon as the Certificate Authority (CA) digital certificate and server authentication
digital certificates are downloaded to the expected location in the MX6, place a copy of
the certificates in the IPSM folder. The certificates must be re-installed using CertAdd
each time a hard reset occurs. When the current date has been set and the certificates re-
installed, soft reset the MX6 to authenticate the supplicant (MX6 radio).
the certificates in the IPSM folder. The certificates must be re-installed using CertAdd
each time a hard reset occurs. When the current date has been set and the certificates re-
installed, soft reset the MX6 to authenticate the supplicant (MX6 radio).
See Also:
Chapter 2 “Accessing Files in Flash Memory”.
Verify Date and Time on the MX6
Access:
Start | Settings | Systems tab | Clock
Figure 7-1 Set the Date and Time
1. Select your correct time zone from the pull-down list.
2. To change the time, select the hour, minute, seconds, or AM/PM and select the up arrow
to increase the value; select/tap the down arrow to decrease the value. Or type a new time
value in the field. Or drag the hands on the clock face.
value in the field. Or drag the hands on the clock face.
3. To change the month, tap the month to open a calendar. Tap the month again and choose
from the drop down list. Or select the left and right arrows to select the month and year.
Or you can type a new month value in the field.
Or you can type a new month value in the field.
4. To change the year, tap the year to open a calendar. Tap the year again and select the up
arrow to increase the value; select/tap the down arrow to decrease the value. Or select the
left and right arrows to select the month and year. Or you can type a new year value in
the field.
left and right arrows to select the month and year. Or you can type a new year value in
the field.
•
Select OK and select Yes to save your changes or select No to exit without saving your
changes and exit Clock.
changes and exit Clock.
•
Select Cancel to return to Clock Properties.