LXE mx6 Verweisanleitung
18
Setting Display Backlight Action
MX6 Reference Guide
E-EQ-MX6RG-E
Setting Display Backlight Action
Access:
Start | Settings | System | Backlight tab
Note: Refer to the section titled "Power Modes" later in this guide for information relating to
the power states of the MX6.
The parameter settings in Start | Settings | System | Backlight tab establish when the display
backlight is turned on and off. The Keypad Backlight key (located at the lower right of the 35-key
keypad and below the Power key on the 56 key keypad) has no effect on display backlight
settings. The display backlight settings have no effect on the keypad Backlight setting.
backlight is turned on and off. The Keypad Backlight key (located at the lower right of the 35-key
keypad and below the Power key on the 56 key keypad) has no effect on display backlight
settings. The display backlight settings have no effect on the keypad Backlight setting.
Figure 2-2 Set Display Backlight Function
Exit and save any changes by tapping OK on the command bar, or pressing Enter on the keypad.
When the MX6 is not in the Suspend state, and the display backlight is off, the display backlight is
toggled on when any key, including the keypad backlight key, is tapped (if “Turn on backlight
when a button is pressed or the screen is tapped” is checked).
toggled on when any key, including the keypad backlight key, is tapped (if “Turn on backlight
when a button is pressed or the screen is tapped” is checked).
If the MX6 is in Suspend, pressing the keypad backlight key has no effect – the MX6 remains in
the Suspend state.
the Suspend state.