LXE mx6 Verweisanleitung
28
Enter Data
MX6 Reference Guide
E-EQ-MX6RG-E
Aiming at a Barcode
Aim the beam aperture away from you, direct it at the barcode and press the trigger or button (as
applicable) to scan. The Scan LED (scan indicators are located above the display) turns red to
indicate the imager is on.
applicable) to scan. The Scan LED (scan indicators are located above the display) turns red to
indicate the imager is on.
Imager
Adjust the aim so that the green aiming beam is centered on the barcode. The red light emitted
from the imager must cover every bar and space on the barcode. When scanning a 2D Matrix
barcode, the scan beam must cover the entire barcode.
from the imager must cover every bar and space on the barcode. When scanning a 2D Matrix
barcode, the scan beam must cover the entire barcode.
Scanner
Adjust the aim so that the red aiming beam is centered on the barcode. The red light emitted from
the imager must cover every bar and space on the barcode. The scanner cannot read a 2D Matrix
barcode.
the imager must cover every bar and space on the barcode. The scanner cannot read a 2D Matrix
barcode.
Linear Barcode
Correct Scan Angle
Incorrect Scan Angles
2D Matrix Barcode
Figure 2-10 Scan Beam