LXE mx6 Verweisanleitung

Reset or Reboot 

41 

E-EQ-MX6RG-E 

 

MX6 Reference Guide 

• 

As soon as the Certificate Authority (CA) certificate and server authentication certificates 
are downloaded to the expected location in the MX6, place a copy of the certificates in 
the IPSM folder. The certificates must be re-installed using CertAdd each time a hard 
reset occurs. When the current date has been set and the certificates installed, soft reset 
the MX6 to authenticate the supplicant (MX6 radio). 

See Also: 

“Accessing Files in Flash Memory”. 

To ensure that changes you make that involve upgrading drivers, adding CAB files or service 
packs or a new kernel are saved, follow the procedure below:  

1.  Delete REGBACKUP.HHP from the \IPSM folder. 

2.  Perform the appropriate Before-you-Proceed step from the table below: 

If you are overwriting a CAB file with a new version, 
rename the existing CAB file or delete it.   

If you are going to be loading a new UTILS_XX.CAB file 
delete AUTOINSTALL.EXE, AUTORUN.INI, and 
AUTORUN.EXE from the \IPSM directory. Failure to do 
this may result in an AUTORUN.INI that does not match 
the installed kernel.  

If you are installing a service pack delete the older service 
packs.   

If you are installing an update file containing a new kernel, 
delete the entire IPSM\AUTOINSTALL directory before 
proceeding. 

3. Install 

software. 

4. 

Hard reset (cold boot) the mobile device to clear the registry. 

5. 

Configure the mobile device.  

• 

See “Getting Started”.  

• 

The radio, flash card, virtual keyboard and scanner parameters need to be 
reconfigured after a hard reset.  

• 

Any programs that were not saved to the IPSM folder need to be reinstalled. 

6. 

Soft reset the mobile device afterwards. 

7. 

Verify the changes. 

8. 

Tap  Start (or the 

 ) | Utils (or Power Tools) | RegBackup to permanently save the 

settings.