LXE mx6 Verweisanleitung

80 

Programs 

MX6 Reference Guide 

 

E-EQ-MX6RG-E 

During configuration, you may have specified one or two certificates to use during the 
authentication process. The specified identity should match the Issued to field in the certificate and 
should be registered on the authentication server that is used by the authenticator. In addition, your 
certificate must be valid on the authentication server. This requirement depends on the 
authentication server and generally means that the authentication server must know the issuer of 
your certificate as a trusted Certificate Authority. 

If the selected certificate does require a password or pass phrase to decode the private key, enter 
this value in the “Certificate Pass Phrase” field. This value will be encrypted when the 
configuration is saved. However, on some systems, there may not be a certificate. If that is the 
case, you can use the section below as a primer on OS X certificate management.

 

CertAdd is a stand-alone utility included with the Client that allows certificates to be selected and 
installed on a Windows Mobile device. 

Client or Certificate Authority (CA) certificates can be imported from *.cer (same as *.der), *.p7b, 
or *.pfx files. 

1.  Download the certificate file to the My Documents folder. The location isn’t critical, although 

you may want to create a standard folder for consistency. 

2.  Go to Start | Programs | Meetinghouse Certificate Installer. The opening screen is displayed. 

All valid certificate file types located in the My Documents folder appear in the list. 

3.  Tap and hold on a certificate in the list. A pop-up appears asking if you want to install the 

certificate. 

4.  Tap OK. The certificate is loaded into the correct certificate store.