LXE mx6 Betriebsanweisung

10 

Power Key 

MX6 User’s Guide 

E-EQ-MX6OGWW-E 

Li-Ion batteries (like all batteries) gradually lose their capacity over time (in a linear fashion) and 
never just stop working. This is important to remember -- the MX6 is always 'on' even when in the 
Suspend state and draws battery power at all times. Tap Start | Settings | System | Power tab to 
check the battery status and power reading. The following chart is an approximation. Actual 
battery capacity will vary based on usage, ambient temperature and peripherals drawing power 
from the MX6: 

100% capacity   2000 mAh minimum 
80% capacity  

1600 mAh minimum 

Deciding when to put a fully charged battery in the MX6 is difficult to quantify because it is very 
application specific. 1600 mAh may be the cutoff for one customer who uses the computer 
frequently, while 500 mAh may be perfectly fine for a customer who occasionally uses the 
computer. You need to determine the point at which battery life becomes unacceptable for your 
business practices and replace the battery before that point. 

   

The Power key is located in the top left corner of the keypad. Press the Power key to 
turn the MX6 on, place it into Suspend or to wake it from Suspend mode.  

You can also use the Scan key (or trigger if installed) to wake the MX6 from 
Suspend.