LXE mx6 Betriebsanweisung
24
Adjust the Handstrap
MX6 User’s Guide
E-EQ-MX6OGWW-E
Adjust the Handstrap
Figure 21 Handstrap
The MX6 has an integrated elastic handstrap that provides a comfortable, secure grip on the unit.
It is attached to the MX6 with a clip on the bottom panel. The handstrap should be disconnected
from the bottom clip when the main battery is to be removed or replaced. The handstrap can be
removed from the MX6 if desired.
It is attached to the MX6 with a clip on the bottom panel. The handstrap should be disconnected
from the bottom clip when the main battery is to be removed or replaced. The handstrap can be
removed from the MX6 if desired.
Prior to adjusting the handstrap, pull down on the handstrap and insert the bottom assembly into
the slot at the bottom of the MX6. Insure that both ends of the bottom assembly are secure.
the slot at the bottom of the MX6. Insure that both ends of the bottom assembly are secure.
Open the closed loop fastener tabs and adjust the handstrap for a comfortable, secure fit. Press the
closed loop fastener ends together.
closed loop fastener ends together.
Note: The handstrap is not available on mobile devices with an integrated laser barcode
scanner.