LXE mx6 Betriebsanweisung

40 

Docking Cradles 

MX6 User’s Guide 

E-EQ-MX6OGWW-E 

The docking cradles give the MX6 the ability to communicate with a host computer and other 
equipment. The MX6 can be either On or in Suspend mode while in the cradles.  

Using wall AC adapters the desktop docking cradle transfers power to the internal charging 
circuitry of the MX6 and, in turn, the MX6 recharges the main battery. The desktop docking 
cradle recharges both the MX6 main battery and an Auxiliary Battery at the same time. 

The vehicle docking cradle uses a 12V cigarette lighter adapter or a bare wire 12-48V power 
supply to transfer power to the internal charging circuitry of the MX6 and, in turn, the MX6 
recharges the main battery. A powered vehicle docking cradle gives the MX6 the ability to 
communicate with a host computer and other equipment. 

A complete battery charge of the main battery pack and an extra battery pack using the desktop 
docking cradle takes less than four hours. The vehicle cradle completely charges the main battery 
in the MX6 in less than four hours. 

The cradles require an external power source, before communications or battery charging is 
available. 

When the desktop cradle is receiving external power, and the MX6 is properly seated in the 
charging bay, the DOCK LED is green. 

DOCK 

Solid Green 

MX6 is properly seated in the charging bay and the 
main battery in the MX6 is charging. 

AUX Battery 

Orange 

The spare battery is charging.  

 

Green  

The spare battery has completed charging and is ready 
for use. 

COMM w/serial port  

Red 

Serial data is being sent to the MX6 from the host. 

 

Green 

Serial data is being sent from the MX6 to the host. 

 

Orange 

Serial data is being sent at high data rates. 

COMM w/USB port 

Green 

USB connection is established with the host. (using 
ActiveSync)