Canon LBP-1000 Betriebsanweisung

A memory overflow has occurred.
The printer has received more data than it can hold in the available
memory on the printer.  This can occur if too many soft fonts, macros or
complex graphics are sent to the printer.
If AUTOCONT is ON (CONFIG MENU), the print job will resume after 10
seconds. If AUTOCONT is OFF, you must press Go and the job will
continue printing, although data may be lost. Simplify the print job by
deleting unnecessary fonts or macros from the printer memory, or add
additional memory to the printer (see 

Getting Started Guide).

The printer is using MRT Compression, with the possibility of print
quality degration (lossy compression).
MRT means 

 and refers to the hardware and

software technologies required to reduce the amount of memory needed
to print complex pages. No action required.

This message is displayed when RESET=MENU is selected in the
RESET MENU.
No action required.

This message is displayed when RESET=PRINTER is selected in
the RESET MENU.
No action required.

No toner cartridge is installed in the printer, or the toner cartridge
is not installed correctly.
Replace the toner cartridge or, if a toner cartridge is installed, remove
it and insert it again. Ensure the toner cartridge is positioned correctly.

This is an error caused by a RAM (DIMM) installed in the printer.
An optional RAM has failed its startup diagnostic check. The optional
RAM must be reinstalled or replaced.

A paper jam has occurred in the printer.
Remove the jammed paper.  The top cover must be opened and closed
to resume printing. Press Go to put the printer back on-line (see page
136).

This message is displayed when SHOW PAGE COUNT is selected
in the TEST MENU, where #### is the total number of pages that
have been printed by the printer.
No action required.

The printer is off-line.
Press Go to take the printer on-line.

TONER CART
MISSING

RESETTING
PRINTER

RESTORING
DEFAULTS

MEMORY ( )
OVERFLOW

MRT COMPRESSION

OPTION RAM ERROR

PAPER JAM

PAGES:####

PAUSED