LXE vx7 Betriebsanweisung
Install Mounting Brackets
45
E-EQ-VX7OGWW-H
VX7 User’s Guide
Step 3 – Attach VX7 Assembly To Bottom Mounting Bracket.
1.
Place lock washer first, then flat washer on 1/4-20x5/8 bolt. Next insert mounting bolts
through the curved apertures in the bottom mounting bracket and into the screw holes on
the side of the back mounting bracket.
through the curved apertures in the bottom mounting bracket and into the screw holes on
the side of the back mounting bracket.
Note:
Back bracket without integrated keyboard mount shown.
Figure 35 Attach VX7 Assembly to Bottom Bracket
2.
Loosely tighten each bolt as it is inserted.
Important:
Do not torque bolts until all bolts are in place and viewing angle
is adjusted.
3.
Loosen the hex bolts on both sides to adjust the viewing angle of the mounted VX7.
4.
Torque the hex bolts to 50±5 in/lb (5.64±.56 N/m).
Note: Test the torque on the bolts frequently during operation and re-tighten if
necessary to 50±5 in/lb (5.64±.56 N/m).