LXE vx7 Betriebsanweisung

 

E-EQ-VX7OGWW-H 

VX7 User’s Guide 

 

Connect the VX7 to a power source, either AC or Vehicle.  

The power (on/off) button is located on the front of the VX7. The switch is sealed by a rubber 
membrane.  The Status LED on the LXE VX7 is illuminated when the power is on: 

• 

 – VX7 is operating from vehicle or AC  

• 

 – VX7 is operating from the UPS  

• 

 – VX7 is operating from the UPS, but UPS battery is critically 

low. 

Press the power button to start the VX7.  There may be slight delays while the wireless client 
connects to the network, re-authorization for voice-enabled applications completes, Wavelink 
Avalanche management of the VX7 startup completes, or Bluetooth relationships establish or re-
establish.  You are now ready to use the computer. 

Enter data using the keyboard, touchscreen or a Serial Barcode Scanner. 

 

The VX7 is designed for an orderly shutdown when using the power button.  An orderly 
shutdown first closes any open programs, and then shuts down the Windows CE operating system.  
DO NOT remove power from the VX7 without shutting down the VX7. 

The VX7 shutdown may be initiated in any of the following ways: 

•  Momentarily pressing and releasing the power button (less than 5 seconds) performs 

an orderly shutdown.   

•  Pressing and holding the power button for more than five seconds forces a 

shutdown.  Any open programs and the Windows CE operating system are shut 
down before power off.  Use this option to shut down the VX7 when the operating 
system is not responding. 

 

For more information on the Windows CE shutdown process, please refer to 
the Windows CE help function or commercially available help guides.