LXE vx7 Verweisanleitung
The Display
67
E-EQ-VX7RG-H
VX7 Reference Guide
The Display
The VX7 Display is a thin-film transistor display capable of supporting SVGA graphics modes.
Display size is 800 x 600 pixels. The display covering is designed to resist stains. The touchscreen
allows signature capture and touch input.
Display size is 800 x 600 pixels. The display covering is designed to resist stains. The touchscreen
allows signature capture and touch input.
The display supports screen blanking to eliminate driver distraction when the vehicle is in motion.
Please see “Technical Specifications – Screen Blanking Cable” earlier in this chapter and “Screen
Blanking” in Chapter 4, “Scanner” for details.
Please see “Technical Specifications – Screen Blanking Cable” earlier in this chapter and “Screen
Blanking” in Chapter 4, “Scanner” for details.
Cleaning the Display
Keep fingers and rough or sharp objects away from the display. If the glass becomes soiled or
smudged, clean only with a standard household cleaner such as Windex® without vinegar or use
Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based cleaning fluids since they
may result in damage to the glass surface. Use a clean, damp, lint-free cloth. Do not scrub optical
surfaces. If possible, clean only those areas which are soiled. Lint/particulates can be removed
with clean, filtered canned air.
smudged, clean only with a standard household cleaner such as Windex® without vinegar or use
Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based cleaning fluids since they
may result in damage to the glass surface. Use a clean, damp, lint-free cloth. Do not scrub optical
surfaces. If possible, clean only those areas which are soiled. Lint/particulates can be removed
with clean, filtered canned air.
Touchscreen
The touchscreen is a Resistive Panel with a scratch resistant finish that can detect touches by a
stylus, and translate them into computer commands. In effect, it simulates a computer mouse.
Only Delrin or plastic styluses should be used. A right mouse click is simulated by touching and
holding the screen for the appropriate time interval.
stylus, and translate them into computer commands. In effect, it simulates a computer mouse.
Only Delrin or plastic styluses should be used. A right mouse click is simulated by touching and
holding the screen for the appropriate time interval.
Note:
Always use the point of the stylus for tapping or making strokes on the display. Never use
an actual pen, pencil or sharp object to write on the touchscreen.
an actual pen, pencil or sharp object to write on the touchscreen.
An extra or replacement stylus may be ordered from LXE. See the “Accessories” section for the
stylus part number.
stylus part number.
Please refer to Chapter 3, “System Configuration” for more information on:
• Calibrating the touchscreen
• Disabling the touchscreen.
• Disabling the touchscreen.
LXE offers a replaceable touchscreen protective film to protect the touchscreen when the VX7 is
used in an abrasive environment. For information on installing or removing the protective film,
please refer to the “VX7 User’s Guide”.
used in an abrasive environment. For information on installing or removing the protective film,
please refer to the “VX7 User’s Guide”.
Touchscreen Heater
Extended temperature versions of the VX7 contain a touchscreen heater. The touchscreen heater
can be disabled on Platform 2 VX7’s when not needed. Please see “Disabling the Touchscreen
Heater” in Chapter 3, “System Configuration”.
can be disabled on Platform 2 VX7’s when not needed. Please see “Disabling the Touchscreen
Heater” in Chapter 3, “System Configuration”.
Note:
To identify your VX7 platform type, please see “Identifying Your VX7”, earlier in this
chapter.
chapter.