LXE vx3x Verweisanleitung

Backup VX3X Files using ActiveSync 

107 

E-EQ-VX3XRG-D 

VX3X Reference Guide 

1.  On the VX3X, select Start | Settings | Control Panel | Network and Dialup Connections. 

A window is displayed showing the existing connections. 

2.  Assuming the one you want does not exist, double-click Make New Connection.  

3.  Give the new connection an appropriate name. Tap the Direct Connection radio button. Tap 

the Next button.  

4.  From the popup menu, choose the port you want to connect to. Only the available ports are 

shown. 

5.  Tap the Configure... button. 

6.  Under the Port Settings tab, choose the appropriate baud rate. Data bits, parity, and stop bits 

remain at 8, none, and 1, respectively. 

7.  Under the Call Options tab, be sure to turn off Wait for dial tone, since a direct connection 

will not have a dial tone. Set the timeout parameter (default is 90 seconds). Tap OK. 

8.  TCP/IP Settings should not need to change from defaults. Tap the Finish button to create the 

new connection.  

9.  Close the Remote Networking window. 

10.  To activate the new connection select Start | Settings | Control Panel | PC Connection and 

tap the Change button. 

11.  Select the new connection. Tap OK twice. 

12.  Close the Control Panel window. 

13.  Connect the desktop PC to the VX3X with the appropriate cable. 

14.  Tap the desktop Connect icon to test the new connection. 

You can activate the connection by double-clicking on the specific connection icon in the Remote 
Networking window, but this will only start an RAS (Remote Access Services) session, and does 
not start ActiveSync properly.