LXE vx3x Verweisanleitung

Reflash the VX3X 

113 

E-EQ-VX3XRG-D 

VX3X Reference Guide 

Requirements:   

•  A screwdriver (not supplied by LXE) 
•  PCMCIA to CF card adapter 

•  LXE recommends that installation of the CF card be performed on a clean, well-lit 

surface. 

•  Loosen the captive screws securing the user access panel cover.  The cover is 

tethered to the VX3X. 

Make sure the VX3X has an uninterrupted power connection before beginning 
the reflash procedure.  Loss of power during the reflash process can result in 
corrupted files. 

 – Please contact LXE Customer Support for information on upgrading Windows 

CE .NET to Windows CE 5.0.  These instructions are only valid for upgrading to another 
revision of the same operating system. 

1.  Place the PCMCIA adapter containing the CF card with new image files on it in the PCMCIA 

slot. 

2.  Double-click My Computer, then Storage Card folder. 

3.  Select NK.BIN, EBOOT.NB0, XSCALE.BIT. Select Edit | Copy. 

4.  Tap Back Arrow. Double-click \System folder. 

5.  Select Edit | Paste. When asked “Overwrite ?”, tap Yes to All. 

6.  When the copy process finishes, remove the PCMCIA adapter containing the CF card. 

7.  Select Start | Run and type Coldboot.  Tap OK. 

8.  Before the splash screen appears, press and hold down the <A> key. Continue to hold it down 

until the displays shows “Writing to boot flash” 

9.  The VX3X automatically reboots after flashing the bootloader. “Loading OS Image” is 

displayed on the screen and when the new OS finishes loading, all software upgrades are 
complete 

10.  Replace the endcap, being careful not to pinch any leads or cables.