LXE vx3x Verweisanleitung
140 Barcode
Manipulation
VX3X Reference Guide
E-EQ-VX3XRG-D
Barcode – Symbology Settings
The Symbology selected in the Symbologies dialog defines the symbology for which the data is
being configured. The features available on the Symbology Settings dialog include the ability to
individually enable or disable a barcode from scanning, set the minimum and maximum size
barcode to accept, strip Code ID, strip data from the beginning or end of a barcode, or (based on
configurable Barcode Data) add a prefix or suffix to a barcode.
being configured. The features available on the Symbology Settings dialog include the ability to
individually enable or disable a barcode from scanning, set the minimum and maximum size
barcode to accept, strip Code ID, strip data from the beginning or end of a barcode, or (based on
configurable Barcode Data) add a prefix or suffix to a barcode.
The Symbology drop-down list contains all symbologies supported on the VX3Plus. An asterisk
appears in front of symbologies that have already been configured or have been modified from the
default value.
appears in front of symbologies that have already been configured or have been modified from the
default value.
Each time a Symbology is changed, the settings are saved as soon as the OK button is tapped.
Settings are also saved when a new Symbology is selected from the Symbology drop-down list.
Settings are also saved when a new Symbology is selected from the Symbology drop-down list.
Figure 4-5 Barcode Tab – Symbology Settings
Clear
This button will erase any programmed overrides, returning to the default settings for the
selected symbology. If Clear is pressed when All is selected as the symbology, a
confirmation dialog appears, then all symbologies are reset to their factory defaults, and
all star (*) indications are removed from the list of Symbologies.
selected symbology. If Clear is pressed when All is selected as the symbology, a
confirmation dialog appears, then all symbologies are reset to their factory defaults, and
all star (*) indications are removed from the list of Symbologies.
The order in which these settings are processed are:
• Code ID
• Leading / Trailing
• Barcode Data
• Leading / Trailing
• Barcode Data
Note: When
Enable Code ID is set to None on the Barcode tab and when All is selected in the
Symbology field, Enable and Strip Code ID on the Symbology panel are grayed and the
user is not allowed to change them, to prevent deactivating the scanner completely.
user is not allowed to change them, to prevent deactivating the scanner completely.
When All is selected in the Symbology field and the settings are changed, the settings in this
dialog become the defaults, used unless overwritten by the settings for individual symbologies.
This is also true for Custom IDs, where the code IDs to be stripped are specified by the user.
dialog become the defaults, used unless overwritten by the settings for individual symbologies.
This is also true for Custom IDs, where the code IDs to be stripped are specified by the user.
Note:
In Custom mode on the Barcode tab, any Code IDs not specified by the user will not be
stripped, because they will not be recognized as code IDs.
stripped, because they will not be recognized as code IDs.
If a specific symbology’s settings have been configured, a star (*) will appear next to it in the
Symbology drop-down box, so the user can tell which symbologies have been modified from their
defaults. If a particular symbology has been configured, the entire set of parameters from that
symbologies screen are in effect for that symbology. In other words, either the settings for the
configured symbology will be used, or the default settings are used, not a combination of the two.
If a symbology has not been configured (does not have an * next to it) the settings for “All” are
Symbology drop-down box, so the user can tell which symbologies have been modified from their
defaults. If a particular symbology has been configured, the entire set of parameters from that
symbologies screen are in effect for that symbology. In other words, either the settings for the
configured symbology will be used, or the default settings are used, not a combination of the two.
If a symbology has not been configured (does not have an * next to it) the settings for “All” are