LXE vx3x Verweisanleitung
Bluetooth
15
E-EQ-VX3XRG-D
VX3X Reference Guide
Continuous search
When enabled, the VX3X never stops searching for a device it has paired with once the
connection is broken (such as the paired device entering Suspend mode, going out of range or
being turned off).
connection is broken (such as the paired device entering Suspend mode, going out of range or
being turned off).
When disabled, the VX3X stops searching after one half hour. The search can be restarted by
putting the VX3X through a Suspend/Resume cycle or accessing the Bluetooth control panel.
putting the VX3X through a Suspend/Resume cycle or accessing the Bluetooth control panel.
This option is disabled by default.
Subsequent Use
Note:
Taskbar and Bluetooth device Icon states change as Bluetooth devices are discovered,
pair, connect and disconnect. A taskbar Bluetooth icon with a red background indicates
Bluetooth is active and not paired with any device. A device icon with a red background
indicates a disconnected paired device.
pair, connect and disconnect. A taskbar Bluetooth icon with a red background indicates
Bluetooth is active and not paired with any device. A device icon with a red background
indicates a disconnected paired device.
1. Tap the Bluetooth icon in the taskbar or on the desktop to open the Bluetooth LXEZ Pairing
application.
2. Tap the Bluetooth Devices tab.
3. Tap the Discover button. When the Bluetooth module begins searching for in-range
Bluetooth devices, the button name changes to Stop. Tap the Stop button to cancel the
Discover function at any time.
Discover function at any time.
4. The discovered devices are listed in the Bluetooth Devices window.
5. Doubletap a Bluetooth device in the Discovered window to open the device properties menu.
6. Tap Pair as Scanner to set up the VX3X to receive scanner data.
7. Tap Pair as Printer to set up the VX3X to send data to the printer.
8. Tap Disconnect to stop pairing with the device. Once disconnected, tap Delete to remove the
device name and data from the VX3X Bluetooth Devices list. The device is deleted after the
user taps OK.
user taps OK.
9. Upon successful pairing, the selected device may react to indicate a successful connection.
The reaction may be an audio signal from the device, flashing LED on the device, or a dialog
box is placed on the VX3X display.
box is placed on the VX3X display.
10. Whenever the VX3X returns from Suspend Mode, all previously paired, live, Bluetooth
devices in the vicinity are paired, one at a time, with the VX3X. If the devices cannot connect
to the VX3X before the re-connect timeout time period expires (default is approximately 20
seconds for each paired device) there is no indication of the continuing disconnect state if
Report Failure to Reconnect is disabled.
to the VX3X before the re-connect timeout time period expires (default is approximately 20
seconds for each paired device) there is no indication of the continuing disconnect state if
Report Failure to Reconnect is disabled.
See Also: Chapter 3 – System Configuration, section titled Bluetooth.