LXE vx3x Betriebsanweisung

4 

Quick Start 

VX3X User’s Guide 

E-EQ-VX3XOGWW-D 

This section’s instructions are based on the assumption that your new system is pre-configured 
and requires only accessory installation and a power source.  

Use this guide as you would any other source book -- reading portions to learn about the VX3X, 
and then referring to it when you need more information about a particular subject. This guide 
takes you through installation and operation of the LXE VX3X. 

In general, the sequence of events is: 

1.  Install RAM ball on back of VX3X.  Install Vehicle Mounting Bracket on vehicle 

and secure VX3X in Mounting Bracket Assembly (see “Installation”, later in this 
manual). 

2.  Connect power cable to the VX3X.  If using DC power, please refer to “Vehicle 12-

80VDC Power Connection”, later in this manual, for instructions, warnings and fuse 
information. 

3.  Connect accessories to VX3X, e.g. scanner, etc.  

4.  Secure all cables to the VX3X with the Strain Relief Cable Clamps. 

5.  Turn the VX3X on. 

6.  When instructed, calibrate the touchscreen. 

7.  The screen may appear white while applications and drivers are loading.  When 

complete, set Date and Time (see the “VX3X Reference Guide”). 

8.  Configure radio (see the “VX3X Reference Guide”). 

9.  Warmboot to ensure all registry settings are saved. 

10.  Device is ready for use. 

The VX3X should be mounted in an area in the vehicle where it: 

•  Does not obstruct the vehicle driver’s vision or safe vehicle operation. 
•  Can be easily accessed by anyone seated in the driver’s seat. 

If your VX3X has AppLock installed, please contact your system administrator 
for setup and processing information. 

AppLock is configured by an administrator to limit general users to only certain 
programs.