LXE vx3x Betriebsanweisung
E-EQ-VX3XOGWW-D
VX3X User’s Guide
Installation
Install Mounting Brackets
Caution:
This device is intended to transmit RF energy. For protection against RF exposure
to humans and in accordance with FCC rules and Industry Canada rules, this
transmitter should be installed such that a minimum separation distance of at least
20 cm (7.8 in.) is maintained between the antenna and the general population.
This device is not to be co-located with other transmitters.
to humans and in accordance with FCC rules and Industry Canada rules, this
transmitter should be installed such that a minimum separation distance of at least
20 cm (7.8 in.) is maintained between the antenna and the general population.
This device is not to be co-located with other transmitters.
Equipment Needed: Phillips No. 1 screwdriver and a Torque wrench capable of measuring to 50
inch pounds (5.64±.56 N/m).
inch pounds (5.64±.56 N/m).
Note:
Torquing tool is not supplied by LXE. Tools needed to attach the RAM Clamp Mount to
the vehicle are not supplied by LXE.
the vehicle are not supplied by LXE.
The VX3X is designed to use a RAM mount system.
Before installation begins, verify you have the applicable vehicle mounting bracket assembly
components necessary, as shown in the following figures.
components necessary, as shown in the following figures.