LXE vx3x Betriebsanweisung
External Power Supply, Optional
39
E-EQ-VX3XOGWW-D
VX3X User’s Guide
External Power Supply, Optional
The LXE-approved AC Power Supply and Adapter Cable are only intended for use in a 25ºC
(77ºF) maximum ambient temperature environment.
(77ºF) maximum ambient temperature environment.
2
1
1. AC Input Cable (US
only)
2. DC Output Cable
AC Power Supply
4
3
3. To DC Output Cable
(see above)
4. To
VX3X
Adapter Cable, AC Power Supply to VX3X
Figure 28 Optional Power Configuration
In North America, this unit is intended for use with a UL Listed ITE power supply with
output rated 12 – 80 VDC, minimum 15W. Outside North America, this unit is intended for
use with an IEC certified ITE power supply with output rated 12 – 80 VDC, minimum 15W.
output rated 12 – 80 VDC, minimum 15W. Outside North America, this unit is intended for
use with an IEC certified ITE power supply with output rated 12 – 80 VDC, minimum 15W.
The external power supply may be connected to either a 120V, 60Hz supply or, outside North
America, to a 230V, 50Hz supply, using the appropriate detachable cordset. In all cases, connect
to a properly grounded source of supply provided with maximum 15 Amp overcurrent protection
(10 Amp for 230V circuits).
America, to a 230V, 50Hz supply, using the appropriate detachable cordset. In all cases, connect
to a properly grounded source of supply provided with maximum 15 Amp overcurrent protection
(10 Amp for 230V circuits).
How To: Connect External Power Supply
1.
Connect the detachable cordset provided by LXE (US only, all others must provide
their own cable) to the external power supply (IEC 320 connector).
their own cable) to the external power supply (IEC 320 connector).
2.
Plug cordset into appropriate, grounded, electrical supply receptacle (AC mains).
3.
Connect the DC Output Cable end to the corresponding connector on the Adapter
Cable.
Cable.
3.
Connect the watertight connector end of the Adapter Cable to the VX3X’s Power
Connector by aligning the connector pins to the power connector; push down on the
watertight connector and twist it to fasten securely.
Connector by aligning the connector pins to the power connector; push down on the
watertight connector and twist it to fasten securely.
4.
Turn the VX3X on.