LXE vx3x Betriebsanweisung

Display and Touchscreen 

45 

E-EQ-VX3XOGWW-D 

VX3X User’s Guide 

Keep fingers and rough or sharp objects away from the display. If the glass becomes soiled or 
smudged, clean only with a standard household cleaner such as Windex

®

 without vinegar or use 

Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based cleaning fluids since they 
may result in damage to the glass surface. Use a clean, damp, lint-free cloth. Do not scrub optical 
surfaces. If possible, clean only those areas which are soiled. Lint/particulates can be removed 
with clean, filtered canned air. 

The touchscreen can be disabled, if desired.  For more information, please refer to “Disabling the 
Touchscreen” in the “VX3X Reference Guide”. 

Although the touch screen is installed and calibrated at the factory, users may make adjustments to 
it.   To calibrate the touchscreen, select Start | Settings and double tap the Stylus icon. 

 

The calibration utility displays a cross on the screen.  Touch the center of the cross with the stylus 
and hold for a few seconds.  Release and repeat with the next cross.  After all locations have been 
touched, either press <Enter> or click the Calibration button. 

LXE offers a replaceable touchscreen protective film to protect the touchscreen when the VX3X 
is used in an abrasive environment.  Installation and removal instructions can be found earlier in 
this guide.