LXE mx8 Verweisanleitung
76
Start Menu Program Options
MX8 Reference Guide
E-EQ-MX8RG-C
Using LXEConnect
1. If an ActiveSync connection has not been established, connect the MX8 to the PC using
the specified cable. See Install LXEConnect for instruction.
2. Doubletap the LXEConnect icon that was created on the PC desktop or doubletap the
LXEConnect.exe file in the default PC installation folder: C:\Program
Files\LXE\LXEConnect. If the user chose a different file location for installation, use the
chosen path to locate the LXEConnect.exe file.
Files\LXE\LXEConnect. If the user chose a different file location for installation, use the
chosen path to locate the LXEConnect.exe file.
3. LXEConnect launches.
4. The About CERDisp box is displayed. Tap the OK button to dismiss the About CERDisp
4. The About CERDisp box is displayed. Tap the OK button to dismiss the About CERDisp
dialog box. The dialog box automatically times out after approximately 30 seconds.
5. A Windows Explorer window is displayed on the PC of the MX8 desktop.
6. Input from the PC’s mouse and keyboard are recognized as if they were attached to the
6. Input from the PC’s mouse and keyboard are recognized as if they were attached to the
MX8.
7. When the remote session is complete, terminate the LXEConnect program on the PC by
selecting File | Exit or tapping the X button in the upper right hand corner to close the
application.
application.
8. Disconnect the ActiveSync cable from the MX8 and the PC.
Refer to ActiveSync / Get Connected Process for full details when using ActiveSync on a desktop
PC and the MX8.
PC and the MX8.
Start / Stop FTP Server
Access:
| Programs | Communication | Start FTP Server or Stop FTP
Server
These shortcuts call the Services Manager to start and stop the FTP server. The server defaults to
Off (for security) unless it is explicitly turned on from the menu.
Off (for security) unless it is explicitly turned on from the menu.
Remote Display
Access:
| Programs | Communication | Remote Display
Equipment Required: MX8 USB ActiveSync Cable. Desktop/laptop computer.
Remote Display is used with ActiveSync to display the contents of the MX8 file structure on a
desktop/laptop computer screen. Once connected, the desktop keyboard and mouse can be used to
manipulate files, data or settings on the MX8.
desktop/laptop computer screen. Once connected, the desktop keyboard and mouse can be used to
manipulate files, data or settings on the MX8.
Before using this program, refer to the following processes outlined in ActiveSync / Get Connected
Process for information and instruction:
Process for information and instruction:
•
“Initial Install | USB Connection”
•
“Initial Install | Connect – Initial Install Process”
•
“Explore”
•
“Disconnect”
Note:
Initial ActiveSync connection requires a USB connection, subsequent connections can be
either USB or RS-232 serial. When the MX8 enters Suspend, an established ActiveSync
connection is maintained. Refer to “ActiveSync / Get Connected Process” for full details.
either USB or RS-232 serial. When the MX8 enters Suspend, an established ActiveSync
connection is maintained. Refer to “ActiveSync / Get Connected Process” for full details.
1. Run ActiveSync on the desktop/laptop.
2. Connect the MX8 to the desktop computer using the USB cable. Follow the instructions
2. Connect the MX8 to the desktop computer using the USB cable. Follow the instructions
on the desktop to set up a partnership (LXE recommends choosing the No option to set up
the MX8 as a guest).
the MX8 as a guest).
3. Select the ActiveSync menu option Explore and the file structure of the MX8 is displayed
in the MX8 window on the desktop monitor.