LXE vx3plus Betriebsanweisung

Laser Barcode Scanner Warnings

E-EQ-VX3PLUSOGWW-B

VX3Plus User’s Guide

Laser Barcode Scanner Warnings

•  Do not look into the laser’s lens.
•  Do not stare directly into the laser beam.
•  Do not remove the laser caution labels from the scanner.
•  Do not connect the laser barcode module to any other device.

Caution:

Please read the caution labels.

Avoid exposure. Laser light is emitted from the scanner’s aperture.

Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.

The scanner uses laser light. The following labels are representations of caution
and warning labels placed on laser scanners.

IEC 825-1

1993

1ST ED.

CAUTION

DO NOT STARE INTO BEAM

630-680nm LASER

1.0 MILLIWATT MAX OUTPUT

CLASS II LASER PRODUCT

COMPLIES WITH 21 CFR 1040.10 1040.11 AND IEC825

LASER LIGHT - DO NOT

STARE INTO BEAM

CLASS 2 LASER PRODUCT

1.0 mW - 675nm

IEC 825-1

1993

1ST ED.

CAUTION

675nm LASER

2.5 MILLIWATT MAX OUTPUT

CLASS IIIA LASER PRODUCT

COMPLIES WITH 21 CFR 1040.10 1040.11 AND IEC825

LASER RADIATION. DO NOT STARE

OPTICAL INSTRUMENTS.

LASER RADIATION

DO NOT STARE INTO BEAM OR
VIEW DIRECTLY WITH OPTICAL

INSTRUMENTS

CLASS 3A LASER PRODUCT

2.5 mW - 675nm

Figure 34 Caution Labels

Class II Scanner

Figure 35 Caution Labels

Class IIIA Scanner

Do not pour, spray, or spill any liquid on the scanner. The Barcode Scanner contains the
circuitry, scanning motor and laser. Handle with appropriate care.

Enter Data

You can enter data into the VX3Plus through several different methods:

•  The tethered scanner connected to the COM1 serial port provides barcode data entry
•  The serial port and SUB port are used to input/output data
•  The keyboard provides manual entry
•  The touchscreen also provides manual entry