LXE vx3plus Verweisanleitung

Summit Radio 

179 

E-EQ-VX3PLUSRG-A 

VX3Plus Reference Guide 

1.  After completing the other entries in the profile, click on the Credentials button.  Leave the 

Username and Password blank.  No entries are necessary on the Credentials screen for LEAP 
or WPA/LEAP.  

2.  For PEAP-MSCHAP, PEAP-GTC and EAP-TLS import the CA certificate into the Windows 

certificate store.   

3.  For EAP-TLS, also import the User Certificate into the Windows certificate store.   

4.  Access the Credentials screen again.  Make sure the Validate server and Use MS store 

checkboxes are checked. 

5.  The default is to use the entire certificate store for the CA certificate.  Alternatively, use the 

Browse button next to the CA Cert (CA Certificate Filename) on the Credentials screen to 
select an individual certificate.   

6.  For EAP-TLS, also enter the User Cert (User Certificate filename) on the credentials screen 

by using the Browse button. 

7.  Click the OK button then the Commit button. 

8.  When the device attempts to connect to the network, a sign-on screen is displayed. 

9.  Enter the Username and Password.  Click the OK button. 

 

10.  Verify the device is authenticated by reviewing the Status tab.  When the device is property 

configured, the Status tab indicates the device is Authenticated and the method used. 

11.  The sign-on screen is displayed after a reboot for each of the listed protocols.   

If a user enters invalid credentials and clicks OK, the device associates but does not 
authenticate.  The user is again prompted to enter credentials. 

If the user clicks the Cancel button, the device does not associate.  The user is not 
prompted again for credentials until the device is rebooted, the radio is disabled then 
enabled, the Reconnect button on the Diags tag is clicked or the profile is modified and 
the Commit button is clicked.