LXE vx3plus Verweisanleitung
Summit Radio
197
E-EQ-VX3PLUSRG-A
VX3Plus Reference Guide
WPA PSK
To connect using WPA/PSK, make sure the following profile options are used:
• Enter the SSID of the Access Point assigned to this profile
• Set EAP Type to None
• Set Encryption to WPA PSK
• Set Auth Type to Open
• Set EAP Type to None
• Set Encryption to WPA PSK
• Set Auth Type to Open
Figure 5-30 WPA/PSK Encryption
Click WEP keys/PSKs button.
Figure 5-31 PSK Entry
This value can be 64 hex characters or an 8 to 63 byte ASCII value. Enter the key and click OK.
Once configured, click the Commit button. Ensure the correct Active Profile is selected on the
Main tab and warmboot. The SCU Main tab shows the device is associated after the radio
connects to the network.
Main tab and warmboot. The SCU Main tab shows the device is associated after the radio
connects to the network.