LXE vx3plus Verweisanleitung

12 

Configuring the VX3Plus with LXEConnect 

VX3Plus Reference Guide 

E-EQ-VX3PLUSRG-A 

Requirements:   ActiveSync version 3.8 (or higher) must be resident on the host (desktop/laptop) 

computer.   Please see the following section ActiveSync  for more details on 
ActiveSync. 

ActiveSync is already installed on the VX3Plus.  The VX3Plus is preconfigured to establish a 
USB ActiveSync connection to a PC when the proper cable is attached to the VX3Plus and the 
PC.  If The VX3Plus uses a serial port for ActiveSync, it is necessary to configure the VX3Plus to 
use the serial port.  Complete details on the proper cables and port configuration are included in 
the ActiveSync section later in this chapter. 

LXEConnect allows a user to view the VX3Plus screen remotely from a PC using an ActiveSync 
connection. 

1.  Install Microsoft ActiveSync version 3.8 or higher on a PC with a USB port.  For details, 

please see ActiveSync later in this chapter.   

2.  Power up the VX3Plus.   

3.  Connect the VX3Plus to the PC using the proper connection cable.  Once connected, the 

ActiveSync dialog box appears.  If using the USB connection, the ActiveSync connection is 
automatically established.  If using a serial connection, it is necessary to initiate the 
connection from the VX3Plus. 

4.  Select “No” for partnership when prompted.  Dismiss any ActiveSync dialog boxes warning a 

partnership is not set up.  It is not necessary to establish a partnership to use LXEConnect.  
However, if a partnership is desired for other reasons, one may be established now.  More 
details on partnerships are included in ActiveSync later in this chapter. 

5.  When the ActiveSync screen appears, select Explore.   

 

6.  An explorer window is displayed for the VX3Plus.  Browse to the \System\LXEConnect 

folder.