Canon lbp-5000 Betriebsanweisung

T

roub

leshooting

Installation Problems

When installing the printer driver from the CD-ROM, the printer is not recognized 
automatically even after the USB cable is connected.

Cause 1

The USB cable has already been connected and the printer is ON before 
installing the printer driver.

Remedy

Turn the printer OFF and disconnect the USB cable. Then, connect the USB 
cable again and turn the printer ON.

Cause 2

The printer is OFF.

Remedy

Turn the printer ON.

Cause 3

The USB cable is not connected properly.

Remedy

Make sure that the printer and computer are connected with the USB cable 
properly.

Cause 4

An inappropriate USB cable is being used.

Remedy

Use a USB cable appropriate for the USB interface of this printer. The USB 
interface of this printer is USB 2.0 Hi-Speed (Windows 2000/XP/Server 2003 
only) and USB Full-Speed (USB1.1 equivalent).
Use a USB cable with the following symbol.

Cause 5

The printer driver cannot be installed from CD-ROM Setup.

Remedy

Install the printer driver with plug and play. (See "Installing with Plug and Play," 
on p. 4-13)

[Local printer attached to this computer]* cannot be selected in the [Add Printer Wizard] 
dialog box (Windows 2000/XP/Server 2003).

Cause

Installation was performed by a user who is not a member of Administrators.

Remedy

CAPT (Canon Advanced Printing Technology) software needs to be installed by 
a member of Administrators. Have a user with the correct permissions to install 
the software.

* On Windows 2000, this becomes [Local Printer].