Canon IP1500 Installationsanweisungen
Series
Photo Printer
Start Here
Easy Setup Instructions
Connect one end of a USB cable to the
computer, the other to the printer.
computer, the other to the printer.
Pinch the paper guide and slide it to the
left. Load a sheet of blank paper in the
paper support. Slide the guide toward the
left edge of the paper.
left. Load a sheet of blank paper in the
paper support. Slide the guide toward the
left edge of the paper.
IMPORTANT: BE SURE THE PRINTER
IS OFF, or the computer will attempt
to install the printer driver before
the printer is ready.
IS OFF, or the computer will attempt
to install the printer driver before
the printer is ready.
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
printer and connect the other end to a
power outlet.
Continue with Step 6
on side two.
on side two.
Paper Guide
USB Cable
USB Port
IMPORTANT: For correct printer
operation, make sure ink tanks
are secure in slots.
operation, make sure ink tanks
are secure in slots.
Protective Cap
Click
Insert the black ink tank (BCI-24 Black)
into the slot on the right. Then press in
until the ink tank clicks into place.
into the slot on the right. Then press in
until the ink tank clicks into place.
Repeat the procedure for the color ink
tank (BCI-24 Color), inserting it into the
remaining slot. Close the front cover.
tank (BCI-24 Color), inserting it into the
remaining slot. Close the front cover.
Remove the black ink tank (BCI-24 Black)
from its package and pull off the orange
protective cap.
from its package and pull off the orange
protective cap.
NOTE: To avoid spilling ink, do not touch
the bottom of the tank once you have
removed the protective cap.
the bottom of the tank once you have
removed the protective cap.
Remove the print head from its package.
Raise the gray lock lever on the printer.
Slide the print head into the holder until
it is securely seated.
it is securely seated.
Do not press it down
Lower the lever until it clicks into place.
Tear at notch to open
Electrical
Contacts
Print Head
Nozzles
NOTE: Do not touch the electrical contacts
or print head nozzles.
or print head nozzles.
Remove the orange protective cap.
Click
Shipping Tape
Packing Material
Print Head Holder
Shipping Tape
Serial Number
Open the paper support and the front cover.
Remove the shipping tape and packing
material from the print head holder.
Remove the shipping tape and packing
material from the print head holder.
Remove all shipping tape and clear plastic film
from the printer.
from the printer.
Write down the serial number located
to the right of the print head holder.
You will need this to register the product.
to the right of the print head holder.
You will need this to register the product.
Carefully remove all items from the box.
PIXMA iP1500
Photo Printer
Documentation
and Software Kit
Power Cord
Print Head
Ink Tanks
BCI-24 Black BCI-24 Color
1
1
2
3
1
5
4
3
1
2
1
2
3
2
3
2
Prepare the Printer
1
Unpack the Printer
3
Install the Print Head
4
Install the Ink Tanks
5
Connect the Printer
And Load Paper
And Load Paper