Canon IP3500 Installationsanweisungen

Please confirm the included items against the illustration printed on the lid of the packing box or in the Quick Start Guide.

A USB cable is necessary to connect the printer with your computer.

•

•

1

a

 Place the printer on a flat and 

horizontal surface, and do not place 

any objects in front of the printer. 

Open the Rear Tray and extend the Paper 

Support. Open the Front Tray, and extend the 

Output Tray Extension. 

b

 Plug the power cord in the back of the 

printer and connect the other end to the 

wall outlet.

c

 Press the 

POWER button to turn on the 

printer.

d

 Open the Top Cover. The Print Head 

Holder moves to the center.

Top Cover

a

 Remove the Print Head from its 

package.

b

 Remove the orange protective cap from 

the Print Head and discard it.

Protective Cap

Print Head Nozzles

Electrical Contacts

Do not touch the print head nozzles and the electrical 

contacts.

c

 Firmly raise the Print Head Lock Lever 

until it stops. The Print Head Lock 

Lever may feel heavy.

d

 Insert the Print Head.

Do not touch!

e

 Push the Print Head to hold it in place, 

and lower the Print Head Lock Lever 

carefully.

f

 Make sure that the Print Head is 

installed correctly.

3

For the ink tanks compatible with this printer, refer to 
the back cover of the Quick Start Guide.

a

 Pull the orange tape in the direction of 

the arrow to peel off the protective film 

and remove the film completely.

If the air hole is blocked with the remaining film, ink 

may leak out or may not eject properly.

b

 Twist off and discard the orange 

protective cap located on the bottom of 

the ink tank.

Protective Cap

Do not press!

Electrical Contacts

Ink Port

c

 Insert the ink tank into the right-hand 

slot and press the   mark on the ink 

tank until it clicks into place.

d

 Make sure the ink lamp lights red.

Install all ink tanks in order 

from right to left according 

to the colored label.

e

 Close the Top Cover.

If the 

ALARM lamp on the printer flashes orange after 

you have closed the Top Cover, refer to “ALARM Lamp 

Flashes Orange” in “Troubleshooting” of the Quick 

Start Guide.

When cleaning the exterior of the printer, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Printer” in the Quick Start Guide.

2

This printer offers two paper sources to load 

printing paper; the Rear Tray, found at the top 

of the printer, and the Front Tray, found at the 

front of the printer.

At purchase, the printer is set to feed from the 

Rear Tray. If you are printing without changing 

paper source settings, load paper in the Rear 

Tray. For details on how to change the paper 

source, refer to “Printing from Your Computer” of 

the Quick Start Guide.

You cannot load paper other than A4, Letter, 

or B5-sized plain paper (such as Canon Super 

White Paper SW-201) in the Front Tray. When 

using any other type of paper, load it in the Rear 

Tray. 

Rear Tray

Front Tray

a

 Load the paper into the Rear Tray 

with the print side facing 

UP.

b

 Align the paper stack against the 

Cover Guide on the right side of 

the Paper Support.

c

 Pinch the Paper Guide and slide 

it against the left side of the paper 

stack.

Make sure that the Cover Guide is set upright 

when you load paper in the Rear Tray.

Paper Guide

Print side 

facing UP.
Cover Guide

a

 Load the paper into the Front Tray 

with the print side facing 

DOWN 

and the leading edge to the far 

side.

b

 Align the right edge of the paper 

stack against the inner face of the 

Front Tray.

c

 Align the near and left edges of 

the paper stack with the Paper 

Size Mark.

d

 Pinch the Paper Guide and slide it 

until it lightly touches the left side 

of the loaded paper stack.

Paper Guide

Print side facing DOWN.

For details, refer to the Quick Start Guide.

•

•