Canon ip3300 Installationsanweisungen

• Please confirm the included items against the illustration printed on the lid of the packing box.

• A USB cable is necessary to connect the printer with your computer.

QT5-0406-V01

a

 Place the printer on a flat and horizontal surface, 

and do not place any objects in front of the 

printer. Open the Sheet Feeder Cover and pull 

out the Paper Support. Open the Front Feeder 

and extend the Output Paper Support.

b 

Plug the power cord in the back of the printer and 

connect the other end to the wall outlet.

c 

Press the 

POWER button to turn on the printer.

1

d 

Open the Top Cover. The Print Head Holder 

moves to the center.

Top Cover

e 

Write down the serial number located inside the 

printer. You will need this to register your product.

Serial Number Location

3

2

a 

Remove the Print Head from its package.

b 

Remove the orange protective cap from the Print 

Head and discard it.

Protective Cap

Electrical Contacts

Print Head Nozzles

Do not touch the print head nozzles and the electrical contacts.

c 

Firmly raise the Print Head Lock Lever until it 

stops.

d 

Insert the Print Head.

Do not touch!

e 

Lower the Print Head Lock Lever carefully.

a 

Peel back the orange tab completely and remove 

the plastic wrapper from the ink tank.

If the orange-colored protective film is not removed 

completely, problems with printing may occur.

b 

Twist off and discard the orange protective cap 

located on the bottom of the ink tank.

Electrical Contacts

Ink Port

Protective Cap

Do not press!

c 

Insert the ink tank into the right-hand slot and 

press the   mark on the ink tank until it clicks 

into place.

d 

Make sure the ink lamp lights red.

Insert all ink tanks in order from 

right to left according to the 

colored label.

e 

Close the Top Cover.

If the 

ALARM lamp on the printer flashes orange after you have 

closed the Top Cover, refer to “ALARM Lamp Flashes Orange” in 

“Troubleshooting” of the Quick Start Guide.

This printer offers two paper sources to load printing 

paper; the Auto Sheet Feeder, found at the top of the 

printer, and the Front Feeder, found at the front of the 

printer.

• At purchase, the printer is set to feed from the Auto Sheet 

Feeder. For details on how to change the paper source, 

refer to “Basic Printing” of the Quick Start Guide.

• You can load A4, Letter, or B5-sized plain paper in the Front 

Feeder. When using any other type of paper, load it in the 

Auto Sheet Feeder.

Auto Sheet Feeder

Front Feeder

a 

Load the paper in the Auto Sheet Feeder 

with the print side facing UP.

b 

Align the paper stack against the Cover 

Guide on the right side of the Paper Support.

c 

Pinch the Paper Guide and slide it against 

the left side of the paper stack.

Paper Guide

Print side facing UP.

Cover Guide

a 

Load the paper in the Front Feeder with the 

print side facing DOWN and the leading 

edge to the far side.

b 

Align the right edge of the paper stack 

against the inner face of the Front Feeder, 

and the near and left edges with the Paper 

Size Mark.

c 

Pinch the Paper Guide and slide it against 

the left side of the loaded paper stack.

Paper Guide

Print side facing DOWN.

For details, refer to the Quick Start Guide.