Canon lbp5970 Betriebsanweisung
8
•
Keep the power cord away from a heat source; failure to do this may
cause the power cord coating to melt, resulting in a fire or electrical
shock.
•
Do not plug or unplug the power plug with wet hands, as this may
result in electrical shock.
•
Do not plug the power cord to a multiplug power strip, as this may
cause a fire or electrical shock.
•
Do not bundle up or tie the power cord in a knot, as this may result in a
fire or electrical shock.
•
Insert the power plug completely into the AC power outlet, as failure to
do so may result in a fire or electrical shock.
•
Do not use power cords other than the power cord provided, as this
may result in a fire or electrical shock.
•
As a general rule, do not use extension cords or plug extension cords
to a multiple power strip. If extension cords must be used or plugged to
a multiple power strip, however, use them observing the following
points on user's own authority. If you use extension cords improperly,
this may result in a fire or electrical shock.
- Do not connect one extension cord to another.
- Make sure that the voltage of the power plug is the one indicated in
the rating label (attached on the back of the printer) when you use the
printer.
- Use an extension cord that allows the current value greater than the
necessary one indicated in the rating label (attached on the back of
the printer).
- When you use an extension cord, untie the cord binding, and insert
the power plug completely into the extension cord outlet to ensure a
firm connection between the power cord and the extension cord.
- Periodically check that the extension cord is not overheated.
CAUTION
•
Do not use power supplies with voltages other than those specified
herein, as this may result in a fire or electrical shock.
•
Always grasp the plug when unplugging the power cord. Pulling on
the power cord may expose or snap the core wire, or otherwise
damage the power cord. If the power cord is damaged, this could
cause current to leak, resulting in a fire or electrical shock.
•
Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug, you
will be unable to unplug it in an emergency.
Handling
WARNING
•
Do not attempt to disassemble or modify the printer. There are high-
temperature and high-voltage components inside the printer which may
result in a fire or electrical shock.
•
Electrical equipment can be hazardous if not used properly. To avoid
injury, do not allow children access to the interior of any electrical
product and do not let them touch any electrical contacts or gears that
are exposed.
•
If the printer makes strange noises, or emits smoke, heat or unusual
smells, immediately turn OFF the printer and computer, and disconnect
the USB cable if it is connected. Then, unplug the power plug from the
AC power outlet and contact your local authorized Canon dealer.
Otherwise, this may result in a fire or electrical shock.
•
Do not use highly flammable sprays near the printer. If gas from these
sprays comes into contact with the electrical components inside the
printer, it may result in a fire or electrical shock.
•
Always turn OFF the printer and computer, and disconnect the
interface cables when moving the printer. Otherwise, the power cord or
interface cables may be damaged, resulting in a fire or electrical shock.
•
Do not drop paper clips, staples, or other metal objects inside the
printer. Also, do not spill water, liquids, or flammable substances
(alcohol, benzene, paint thinner, etc.) inside the printer. If these items
come into contact with a high-voltage area inside the printer, this may
result in a fire or electrical shock. If these items are dropped or slipped
inside the printer, immediately turn OFF the printer and computer, and
disconnect the USB cable if it is connected. Then, unplug the power
plug from the AC power outlet and contact your local authorized Canon
dealer.
•
When plugging or unplugging the USB cable when the power plug is
plugged in an AC power outlet, do not touch the metal part of the
connector, as this may result in electrical shock.
CAUTION
•
Do not place heavy objects on the printer, as they may tip over or fall
resulting in personal injury.