Ricoh 2035e Benutzerhandbuch

Troubleshooting

108

The main power indicator 
continues blinking and 
does not turn off when 
pressed.

This occurs in the follow-
ing cases:

• The exposure glass cov-

er or the ADF is open.

• The machine is commu-

nicating with external 
equipment.

• The hard disk is active.

Close the exposure glass cover or 
ADF, and check if the machine is 
communicating with a computer.

Original images are print-
ed on the reverse side of 
the paper.

You may have loaded the 
paper incorrectly.

Load paper correctly. Load paper 
into Tray 1-4 with the print side up, 
and into the LCT or bypass tray 
with the print side down. See p.112 
“Orientation-Fixed Paper or Two-
Sided Paper”.

Misfeeds occur frequently.

The tray's side guides may 
not be locked.

Check the side guides are locked. 
p.126 “Changing the Paper Size”.

The tray's end guide may 
not be set properly.

Check the end guide is set properly. 
See p.126 “Changing the Paper 
Size”.

You may have loaded pa-
per of a size not shown on 
the paper size selector.

When using paper of a size that can-
not be detected automatically, use 
Tray Paper Settings to set the paper 
size. See p.55 “Tray Paper Size: Tray 
1–4” and p.167 “Copy Paper”.

An error message remains, 
even if misfed paper is re-
moved.

When a misfeed message 
appears, it remains until 
you open and close the cov-
er, as required.

Clear misfed paper, and then open 
and close the front cover. See p.116 
“x Clearing Misfeeds”.

Cannot print in duplex 
mode.

You cannot use paper in 
the bypass tray for duplex 
printing.

For duplex printing, select Tray 1-4 
in copier mode or with the printer 
driver.

 is selected for 

Paper Type: Tray 1-4.

Select 

 for Paper Type: 

Tray 1-4. See p.56 “Paper Type: Tray 
1–4” 

You forgot your key opera-
tor code

—

Contact your service representative.