Ricoh 2035e Benutzerhandbuch
Connecting the Network Cable to the Network
14
2
Connecting to the Ethernet
Interface
Interface
The network interface board supports
10BASE-T or 100BASE-TX connec-
tions.
10BASE-T or 100BASE-TX connec-
tions.
AAAA
Turn off the main power switch.
Important
❒ Make sure the main power is
off. See “Turning On the Pow-
er”, General Settings Guide.
er”, General Settings Guide.
BBBB
Connect the Ethernet interface ca-
ble to the 10BASE-T/100BASE-TX
port.
ble to the 10BASE-T/100BASE-TX
port.
CCCC
Turn on the main power switch.
1.
Indicator (green)
Remains green when the machine is
properly connected to the network.
properly connected to the network.
2.
Indicator (yellow)
Turns yellow when 100 BASE-TX is
operating. Turns off when 10 BASE-T
is operating.
operating. Turns off when 10 BASE-T
is operating.
Connecting to the IEEE 1394
Interface
Interface
Important
❒ Before making the connection,
touch the metallic part to ground
yourself.
yourself.
Note
❒ Use the interface cable supplied
with the IEEE 1394 interface board
(optional).
(optional).
❒ Make sure the interface cable is not
looped.
AAAA
Connect the IEEE 1394 interface
cable to the IEEE 1394 ports.
cable to the IEEE 1394 ports.
Note
❒ Two interface ports are availa-
ble for connecting the IEEE 1394
interface cable, either is suita-
ble.
interface cable, either is suita-
ble.
ZHZH020J
ZHZH030J