Ricoh 2035e Benutzerhandbuch

Using the Printer Function

58

This describes how to configure the
machine for use as a print server or
remote printer in a NetWare environ-
ment.

This section assumes NetWare is
functional and the necessary environ-
ment for the NetWare print service is
available.

❒ NetWare must be set to active us-

ing the machine's control panel.
For more information about how
to set it, see p.17 “Setting Up the
Machine on a Network”.

❖

❖

❖

❖ SmartNetMonitor for Admin

To use a printer in a NetWare envi-
ronment, configure the NetWare
p r i n t i n g   e n v i r o n m e n t   u s i n g
SmartNetMonitor for Admin.

❒ If you configure NetWare print-

ing using SmartNetMonitor for
Admin under the following en-
vironments, NetWare Client
from Novell is required:
• NDS mode in Windows

95/98/Me

• NDS or Bindery mode in

Windows 2000/Windows
NT 4.0

❖

❖

❖

❖ Printers listed by SmartNetMonitor for

SmartNetMonitor for Admin dis-
plays a list of printers that are con-
nected to the network.
If you cannot find the printer from
the displayed list, refer to the con-
figuration page printed from the
machine. For more information
about printing a configuration
page, see Printer Reference 2.

Install the NIB Setup Tool

Print Server

Remote Printer

Configure the network interface board

Configure the NetWare

Start the print server

Restart the printer