Ricoh 2035e Benutzerhandbuch

Placing Originals

15

When setting bound originals (books,
magazines, etc.), you can select to
have either the left page or right page
sent first. See p.61 “Book Fax”, Fac-
simile Reference <Advanced Features> .

r You can select whether the left

page or right page is sent first. See
p.159 “User Parameters”, Facsimile
Reference <Advanced Features>
(switch 06, bit 6).

Use the ADF to scan in a stack of orig-
inals in one operation. The ADF can
handle both one-sided and two-sided
originals.

r Place all the originals to be sent in

a single stack. 

r You cannot place originals in the

ADF one page at a time or in
sheaves.

r The maximum document length is

1200 mm (47").

r If you send documents longer than

420 mm (17"), specify the area to be
scanned. If you send such docu-
ments frequently, select Long Doc-
u m e n t   m o d e   w i t h   t h e   U s e r
Parameters. If a jam occurs, the
document might be damaged be-
cause scanning will not stop. See
p.16 “Setting a Scan Area”. See
p.159 “User Parameters”, Facsimile
Reference <Advanced Features>
(switch 14, bit 1).

r Documents longer than 800 mm

(32") must be sent by memory
transmission (immediate transmis-
sion is not possible).

r If  your  original  is  bent  or  folded,

flatten it before you place it. 

r When sending thin originals, place

them on the exposure glass. 

r If an original jammed, press the

{Clear/Stop} key, and then slowly
remove the original.

r You can check information about

the sizes and number of originals
that can be placed in the ADF. See
p.196 “Acceptable Types of Origi-
nals”,  Facsimile Reference <Ad-
vanced Features> .

A

B

Zewh060E.eps