Ricoh 2035e Benutzerhandbuch

Seite von 1044
3
1. Transmission Mode
Sending at a Specific Time (Send Later)
Using this function, you can instruct
the machine to delay transmission of
your fax message until a specified lat-
er time. This allows you to take ad-
v a n t a g e   o f   o f f - p e a k   t e l e p h o n e
charges without having to be by the
machine at the time.
If you have a non-urgent fax, select
Send Later with Economy Transmis-
sion when you scan it. Faxes will be
queued in memory and sent during
Economy Transmission Time.
Important
r After the machine has been
switched off for about one hour, all
fax messages stored in memory are
lost. If messages are lost for this
reason, a Power Failure Report is
automatically printed when the
operation switch is turned on. Use
this report to identify lost messag-
es.
Limitation
r This function is unavailable with
Immediate Transmission. Use
Memory Transmission.
Note
r You can specify a time within 24
hours.
r If the current time shown is not
correct, change it. See “Timer Set-
tings”, General Settings Guide.
r If the document is sent before the
specific time, Transmission Result
Report is printed and the job is
completed.
r For convenience, you can program
the time when your phone charges
become cheaper as the Economy
Transmission Time. See p.143
“Program Economy Time”.
r You can program one of the Quick
Operation keys with operations for
this function. Using the key allows
you to omit steps 
B and C.
A
Place the original, and then select
the scan settings you require. 
Reference
B
Press 
[
Transmission Mode
]
.
C
Press 
[
Send Later
]
.